1 7

Magnetic Insect Screen

Magnetic Insect Screen

£27.00
£27.00
SAVE 0% Sold out
21 people have this product in their cart
Ana and +12,000 people have bought it
Type: Door
Color: Black
Size: 70 x 210 cm
  • Visa
  • Mastercard
  • PayPal
  • Apple Pay
  • Shop Pay
  • American Express
  • Klarna

SUMMER OFFER


🔥 -10% from 2 mosquito nets
🔥 -20% from 4 mosquito nets


Discount applied automatically in the cart!

Magnetic fixation on all 4 sides

Continuous magnetic strips on all four sides. The mesh stays taut with no central opening.

Installation in minutes

No drilling or tools. Stick the adhesive tape to the frame, attach the mosquito net and remove it whenever you like.

Premium fiberglass mesh

Breathable and durable fabric. Lets light and air through, but not insects.

Ideal for any room

Bathrooms, kitchens and bedrooms. Withstands wind and lasts season after season.

2 cm tape

Firm and long-lasting hold

30-day guarantee

Try it risk-free, satisfied or refunded for 30 days.

  • Finally I can leave the door open

    I fitted it on the 90 door in twenty minutes, without drilling. The magnets close on their own and the dog goes in and out without any problem.

  • The mesh is very strong

    Two for the living room windows, 60x60. Thicker than I expected and doesn't block the light. I'll order again for the bedroom.

  • Does the job, but measure carefully

    Good value for money. Measure the frame twice, the sizing is tight. Air gets through and insects don't.

Free shipping

Available with this purchase

24/7 Support

A team at your service

How do I measure correctly?

It depends on where you measure. Choose method A or B.

A — You measure the window or door opening
Add 4 cm to the width and 4 cm to the height. The magnetic strips take up 2 cm on each side.

B — You measure the frame you'll stick it to (outside or inside)
Don't add anything. Measure the whole frame, edge to edge.

What if it's a bit too big?
No problem. You can fold the excess or shift the mosquito net slightly, without getting in the way when opening or closing.

Tip: Always round up. Better a little too much than not enough 😉

How is it installed?

Installation in 5 steps

1. Clean the frame with an alcohol wipe and let it dry for 1 minute.

2. Unroll the magnetic tape, measure it and cut it into 4 pieces: 2 for the height and 2 for the width.

3. Remove the adhesive backing from each piece and stick them all around the frame, on all 4 sides.

4. Press each strip firmly so it holds well. If needed, add extra tape to reinforce the hold.

5. Place the mosquito net against the magnetic strips and line it up. Check the position, adjust if necessary and enjoy a summer free of insects.

🔹 Note: the magnets are hidden and built into the entire edge of the mosquito net, for a perfect grip on all 4 sides.

View full details